Skip to content
India RFID Store

UHF IHZ-4 RFID Multi Port Reader – Impinj E710
Model IDTS-IHZ4Brand IdentiumAvailability In Stock

UHF IHZ-4 RFID Multi Port Reader – Impinj E710

A four-port fixed UHF RFID reader on the Impinj E710, reading up to 1,000 tags a second at up to 30 m, with Ethernet, serial, Wiegand and relay I/O for attendance, access, library and toll systems.

Model:
IDTS-IHZ4
Brand:
Identium
Chip:
Impinj E710, dual power-amplifier circuit
Protocol:
ISO/IEC 18000-6C (EPC C1 Gen2), ISO/IEC 18000-6B, Impinj Gen2X
Frequency:
865–868 MHz (India, ETSI EN 302 208); 902–928 MHz (FCC Part 15) version
Frequency stability:
≤ ±10 ppm
Datasheet:
PDF · 209 KB
Listing updated:

₹55,000

per piece + 18% GST

₹64,900 incl. GST

Min. order 1 pieceRequest a quote and pay by NEFT or UPI against the quotation

Compare with IDTS-IHZ4N → · Compare with IDTS-IHZ8 and IDTS-IHZ16 → · Compare with IDTS-IHZ4(Wifi) and IDTS-IHZ4 →

  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery
  • Ordered by quotation · in-stock items are dispatched the same day after payment · shipping is shown in your quotation

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

Key features

  • Impinj E710 platform with dual power-amplifier circuit
  • 4 × SMA antenna ports; reads up to 30 m, writes up to 8 m (site dependent)
  • Up to 1,000 tags per second with multi-tag anti-collision
  • RJ45, RS-232, RS-485, Wiegand and USB 2.0; 3 inputs and 3 relay outputs
  • Java, .NET and C++ APIs plus a direct post API
  • BIS and WPC approved
Watch the product video

Overview

IHZ4 4-port UHF RFID reader for fixed read points

The IHZ4 is a fixed UHF RFID reader that drives up to four external antennas from one unit. Built on the Impinj E710 platform with a dual power-amplifier circuit, it reads up to 1,000 tags per second and, with suitable antennas and tags, reaches up to 30 m. It is meant for read points where accuracy and range both matter: school and factory entrances, library exits, access-controlled doors and toll lanes.

Connections for integrators

This version carries the interfaces most system integrators ask for, so it drops into an existing set-up without converters:

  • RJ45 Ethernet for network software, servers and the direct post API
  • Wiegand to pass tag IDs to a door or attendance controller as if they were card reads
  • RS-485 and RS-232 for PLCs and serial controllers, with RS-485 suited to longer cable runs
  • USB 2.0 for bench set-up and testing
  • 3 inputs and 3 relay outputs for sensors, boom barriers, hooters and lamps

Java,.NET and C++ APIs are available for custom applications, and the reader reports RSSI, detects connected antennas and supports data filtering and online updates.

Planning the read zones

Four SMA ports let one reader cover both sides of a gate, two neighbouring lanes, or a doorway plus a counter. For more zones from one reader, it is also available with 8 or 16 antenna ports: the IDTS-IHZ8 and IDTS-IHZ16.

Output power is adjustable from 0 to 33 dBm in 1 dB steps, so the read field can be trimmed to stop tags beyond the doorway being picked up. The aluminium, anti-shock housing is built for factory and warehouse sites. Pair it with UHF antennas suited to each zone from the RFID antenna range.

Which IHZ4 version to choose

Choose this model for wired Ethernet plus serial and Wiegand. If you want one cable to carry both power and data, pick the PoE IHZ4; where a network cable cannot be run, the Wi-Fi IHZ4 connects wirelessly. The IHZ4 is BIS and WPC approved.

Where the IDTS-IHZ4 is used

  • School time attendance
  • Personnel tracking in plants
  • Library security gates
  • Door access control
  • Toll plaza lanes
  • Warehouse dock doors

Product videos

Identium IHZ4 4-Port UHF RFID Fixed Reader India | Up to 30 m, Wiegand, relays, ReaderSense
IHZ4 UHF 4-Port RFID Reader
Automated RFID Alarm System with the IHZ4
All product videos →

Specifications

Datasheet (PDF)
ModelIDTS-IHZ4
ChipImpinj E710, dual power-amplifier circuit
ProtocolISO/IEC 18000-6C (EPC C1 Gen2), ISO/IEC 18000-6B, Impinj Gen2X
Frequency865–868 MHz (India, ETSI EN 302 208); 902–928 MHz (FCC Part 15) version
Output power0–33 dBm (±1 dBm), adjustable in 1 dB steps
Channel bandwidth< 200 kHz
Frequency stability≤ ±10 ppm
Work modeFixed or hopping frequency
Read speedUp to 1,000 tags/s
Anti-collisionMulti-tag reading
Read rangeUp to 30 m (antenna, tag and environment dependent)Estimate range for your set-up →
Write rangeUp to 8 m (environment dependent)
Ports4 × SMA antenna ports
InterfaceRJ45, RS-232, RS-485, Wiegand, USB 2.0 (Wi-Fi, Bluetooth can be added)
I/O3 inputs, 3 relay outputs
SoftwareRSSI, antenna detection, online update, data filtering
APIJava, .NET, C++, direct post API
HousingAluminium, anti-shock design
IndicatorsPower and status
Operating temperature-20 °C to +70 °C
Storage temperature-40 °C to +85 °C
Atmospheric pressure86–108 kPa
HumidityNon-condensing
Dimensions170 × 120 × 25 mm
Weight0.5 kg
CertificationBIS and WPC approved

Software, SDK and manuals

5 downloads for the IDTS-IHZ4.

  • Identium ReaderSense — Windows Installer Desktop software

    Windows · Setup .exe · 85.0 MB
    Download
  • Identium ReaderSense — Windows Portable Desktop software

    Windows · Portable .exe · 84.7 MB
    Download
  • Identium ReaderSense — macOS (Apple Silicon) Desktop software

    macOS · M1/M2/M3 · 103.8 MB
    Download
  • Identium ReaderSense — macOS (Intel) Desktop software

    macOS · Intel · 111.6 MB
    Download
  • Identium ReaderSense — User Manual Manual

    PDF · Manual · 1.4 MB
    Download
All Identium software downloads

Frequently asked questions

What read range should I expect from the IHZ4?
Up to 30 m for reading and 8 m for writing, depending on the environment. Those figures need high-gain antennas, good tags and an open site; tags on metal or liquids, small labels and crowded areas reduce range. Test with your own tags at the actual read point.
Can the IHZ4 connect to an attendance or door controller?
Yes. Its Wiegand output passes the tag ID to a controller the same way a card reader does, and the three relay outputs can switch a door lock, boom barrier or hooter. RS-485, RS-232, RJ45 and USB 2.0 are also available.
Is the IHZ4 approved for use in India?
The IHZ4 is BIS and WPC approved. It operates in India’s licence-exempt 865–868 MHz UHF band. Ask for certificate copies with your quote if your tender needs them.
Which software can I use with it?
Java, .NET and C++ APIs are available for your own application, and the direct post API sends tag data to your server. For connecting reads to ERP or WMS software, see our RFID middleware guide.
Is there a version for the US band?
Yes. The IHZ4 is listed in a 902–928 MHz (FCC Part 15) version as well as 865–868 MHz (ETSI, used in India). Mention the destination country when you request a quote.

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.