UHF RFID Cards
Credit-card size (CR80) PVC cards with an EPC Gen2 UHF chip, for vehicle gates, car parks, turnstiles and staff ID where the card is read from a distance instead of tapped. Plain, printed and 0.9 mm versions.
Buying guide ↓- Products:
- 3
- Price range:
- ₹20 – ₹30 + GST
- Minimum order:
- 500 pieces
- Frequency:
- UHF, India band 865–868 MHz
- Samples:
- ₹250 for 1–2 pieces, incl. shipping
- Updated:
Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.
UHF RFID Cards: prices and models (₹ per piece, excl. 18% GST)
3 products · from ₹20 + GST
IDTS-IDC3D
Plain UHF RFID Card – IDTS – IDC3D
- Chip: Higgs-3, UCODE 8 …
- Range: 0.5–1.5 m
₹25 + GST
Min. order 500 pcsNo products match that filter. Ask us for a custom option.
Buying guide
Choosing UHF RFID cards for access and vehicle identification
A UHF RFID card is a standard CR80 PVC card (85.6 × 54 mm) with an EPC Gen2 / ISO 18000-6C inlay inside. Most office access cards run at 125 kHz or 13.56 MHz and must be held against the reader. UHF cards are read at a distance in India's 865–868 MHz band, so drivers and staff pass a gate or turnstile without stopping to tap.
Read distance depends mainly on the reader, its antenna and how the card is carried. A card in a wallet or pocket, close to the body, reads at a shorter distance than one held up to the reader or kept on the dashboard.
UHF cards in this category
Plain, for in-house printing
The Plain UHF RFID Card IDTS-IDC3D is blank white PVC, 0.76 mm thick, made to run through Zebra, Evolis, HID and Fargo PVC card printers. Choose an Alien H3, NXP UCODE 8 or UCODE 9 chip when ordering.
Printed to your artwork
Printed UHF Cards come with your logo, photo, name, sequential numbers, QR code or barcode on one or both sides, with gloss or matte lamination and options such as a magnetic stripe or hologram.
0.9 mm card for gates and lanes
The UHF Card IDTS-IDC62 is 0.9 mm white PVC with 96-bit encodable EPC memory, meant for vehicle lanes, car parks and high-speed turnstiles. It is also available printed and bulk encoded.
How to choose
| Question | What it means for your order |
|---|---|
| Do you have a PVC card printer? | Order the plain IDC3D and print in-house. If not, order Printed UHF Cards and send your design. |
| Is the card for a person or a vehicle? | For people at turnstiles and staff gates, a card works well. For a permanent vehicle pass, a tamper-proof windshield label that stays on the glass is often the better fit. |
| Do your doors already use MIFARE or 125 kHz cards? | A UHF-only card will not open those doors. A dual-frequency card carries both chips in one badge. |
| What numbering does your software expect? | Share your EPC format or serial series so cards can be encoded and printed to match. |
Readers to pair with UHF cards
UHF cards work with EPC Gen2 readers set to 865–868 MHz. Match the reader to the read point:
- Doors, turnstiles and attendance points: the UHF RFID Card Reader ID-UCR-RD901M reads within 0–1 m and outputs Wiegand 26/34 or RS485 to an access control panel.
- Vehicle gates and car parks: a long-range integrated reader at the barrier, such as the IF-12 or the BIS and WPC approved IF9A.
- Issuing cards at a desk: a USB desktop reader such as the UDR-111 reads each card number into your software in keyboard mode. See all UHF desktop readers.
If your site already runs on MIFARE or 125 kHz cards, look at the dual-frequency RFID cards. For a side-by-side comparison of card technologies, read RFID cards explained: UHF vs HF vs LF vs MIFARE.