Skip to content
India RFID Store

Plain UHF RFID Card – IDTS – IDC3D
Model IDTS-IDC3DBrand IdentiumAvailability In Stock

Plain UHF RFID Card – IDTS – IDC3D

A blank white CR80 PVC card with a UHF RFID inlay, for organisations that print their own ID or access cards. Personalise it on a standard PVC card printer and read it at 0.5–1.5 m with an EPC Gen2 UHF reader.

Model:
IDTS-IDC3D
Brand:
Identium
Frequency:
865–868 MHz (UHF, India)
Protocol:
EPC Gen2 / ISO 18000-6C
Chip:
Alien H3, NXP UCODE 8 or NXP UCODE 9 (choose when ordering)
Read range:
0.5–1.5 m (reader and antenna dependent)
Datasheet:
PDF · 162 KB
Listing updated:

₹25

per piece + 18% GST

Min. order 500 piecesThe final price for your quantity is confirmed in the quote

  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery
  • Samples ₹250 (1–2 pcs, incl. shipping) · request a sample of this card

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

Key features

  • Blank white CR80 PVC, 85.6 × 54 × 0.76 mm, ready for in-house printing
  • Prints on Zebra, Evolis, HID and Fargo PVC card printers
  • UHF EPC Gen2 / ISO 18000-6C at 865–868 MHz
  • Read range 0.5–1.5 m, depending on reader and antenna
  • Choice of Alien H3, NXP UCODE 8 or NXP UCODE 9 chip
  • 96-bit EPC, supplied blank or factory programmed

Overview

Plain UHF RFID card for in-house ID printing

The IDTS-IDC3D is for buyers who print their own cards and personalise them as staff, members or vehicles are added. The face is plain white PVC in the ISO CR80 format, 85.6 × 54 × 0.76 mm, so it feeds through Zebra, Evolis, HID and Fargo card printers like any blank card. An overlay laminate option protects the print on cards that are handled every day.

Chip and encoding options

Inside is a UHF inlay working at 865–868 MHz to EPC Gen2 / ISO 18000-6C. You can order it with an Alien H3, NXP UCODE 8 or NXP UCODE 9 chip, which helps when your software or existing card stock is built around one of them. The 96-bit EPC can be left blank for your own encoding or programmed at the factory.

Where a plain UHF card fits

  • Employee ID cards that also work at UHF access lanes
  • Parking cards, as an alternative to a windshield sticker
  • Library, membership and loyalty cards
  • Event badges that double as an RFID credential

The listed read range of 0.5–1.5 m is for a card carried in a wallet or close to the body. At the card issuing desk, a UHF desktop reader captures each card's number into your software. Compare other formats in UHF cards.

Where the IDTS-IDC3D is used

  • Employee ID cards
  • Gate access control
  • Vehicle parking access
  • Library cards
  • Event badges
  • Loyalty cards

Specifications

Datasheet (PDF)
ModelIDTS-IDC3D
Frequency865–868 MHz (UHF, India)
ProtocolEPC Gen2 / ISO 18000-6C
ChipAlien H3, NXP UCODE 8 or NXP UCODE 9 (choose when ordering)
Memory96-bit EPC, blank or factory programmed
Read range0.5–1.5 m (reader and antenna dependent)
Dimensions85.6 × 54 × 0.76 mm (ISO CR80)See this size at actual size →
MaterialPVC, plain white printable surface
Compatible withZebra, Evolis, HID and Fargo PVC card printers
Finish optionsOverlay laminate for print protection

Frequently asked questions

Can I print the IDC3D on my own card printer?
Yes. It has a blank white PVC surface in standard CR80 size (85.6 × 54 × 0.76 mm) and works with PVC card printers such as Zebra, Evolis, HID and Fargo, so you can add logos, names, photos and barcodes in house. An overlay laminate option protects the print.
What is the read range of this plain UHF card?
About 0.5–1.5 m, depending on the reader and antenna. The figure is for a card carried in a wallet or close to the body, where the body absorbs some of the UHF signal.
Which chip should I choose: Alien H3, UCODE 8 or UCODE 9?
All three are EPC Gen2 UHF chips and read on standard UHF readers. If your software or existing cards already use one of them, order the same chip; if you are starting fresh, tell us your application and we will suggest one.
Can the cards come pre-encoded?
Yes. The 96-bit EPC can be programmed at the factory, for example with your card numbers, or left blank so you encode it yourself with a UHF reader-writer.
Will this card work with my existing door access or attendance reader?
Only if that reader is a UHF (865–868 MHz) reader. Most door and attendance terminals read 125 kHz or 13.56 MHz cards, which need LF cards or HF cards instead.

Related products

All UHF RFID Cards →

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.