Skip to content
India RFID Store

UHF RFID Desktop Readers & Encoders

Desktop UHF RFID reader-writers for reading, checking and encoding tags, labels and cards at one PC or counter, over USB, RS232, Ethernet or Wi-Fi, plus smart trays that count the tagged items laid on them.

Buying guide ↓
Products:
9
Price range:
₹10,500 – ₹45,000 + GST
Minimum order:
1 piece
Frequency:
UHF, India band 865–868 MHz
Updated:

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

UHF RFID Desktop Readers & Encoders: prices and models (₹ per piece, excl. 18% GST)

9 products · from ₹10,500 + GST

CX110T

RFID Smart Tray CX110T

  • Range: 1–3 m, depending on tag
  • Interface: USB, Bluetooth, Wi-Fi …

₹45,000 + GST

Per piece
Models at a glance (table)9 products

Watch it working

103UDR Desktop RFID Reader & Writer — USB Encoding, Batch Writing, Keyboard Mode
UHF Desktop Reader Demo (2020)
CX111T RFID Smart Tray
All product videos →

Buying guide

What a UHF RFID desktop reader is used for

A desktop reader sits beside a PC, billing counter or issue desk and works on the tags placed on or near it. Typical jobs are registering new cards and labels, writing your own numbers into tags before they go into use, checking a tag's EPC, and scanning tagged items one at a time at a counter. Most models have a short, adjustable read zone, so they do not pick up every tag in the room the way a fixed or handheld reader would.

Desktop reader-writers in this category

ModelConnectionChoose it for
UDR-111Single USB cable for power and dataReading and encoding at one PC; HID keyboard mode types tag numbers into any application; 0–50 cm read distance; SDK included
103Serial or HID output, no driver or separate power supplyPlug-in use with no driver to install; read radius adjustable up to 30 cm; BIS approved model (103UDR)
120LUSB, HID keyboard or protocol modeBulk encoding: the free utility imports data from Excel and writes tags one after another
107SLRS232 and RJ45 Ethernet; Wi-Fi optionalPOS terminals, PLCs and networked PCs that cannot use USB; up to 300 mm read distance
107WUSB and 2.4 GHz Wi-FiCounters and stockrooms with no network cable; reads up to 2 m; SDK for Windows, Android and iOS

RFID smart trays

A smart tray has an antenna under its surface tuned to read only the tagged pieces laid on it, not the stock around it. Jewellers use one to count a tray of tagged pieces in a single read; retail and document desks use them for batch check-in and check-out.

Bluetooth, battery powered

The RFID Smart Tray for jewellery has a velvet surface, sends reads over Bluetooth to an Android or iOS phone or tablet, and runs up to 6 hours on its built-in battery.

Square, wired

The CX110T is a 260 × 260 mm tray on an Impinj E310 chip, with PoE, USB and RS232, three relays and on-board storage for 1,000 tags.

Large and slim

The CX111T offers a 338 × 248 mm surface only 28 mm thick, for building into counter furniture, with PoE, RS232 and USB.

How to choose

  • No software development: pick a reader with HID keyboard mode (UDR-111, 103, 120L or 107W). Each read types the tag number into Excel, a web form or your ERP screen, as described in RFID scanner to Excel.
  • Encoding in batches: the 120L's Excel import suits issuing hundreds of labels or cards in one session. For printed labels in volume, a UHF RFID printer prints and encodes in one pass.
  • Connection: USB for a single PC; RS232 or Ethernet (107SL) for POS and PLC equipment; Wi-Fi (107W) where cabling is not possible.
  • Read distance: at a desk, shorter is usually better because it avoids writing to the wrong tag. Turn down the RF power to tighten the zone.
  • Tag type: these readers work with UHF EPC Gen2 tags and cards, not 125 kHz or 13.56 MHz cards. For those, see HF RFID readers.

Also listed here: the QR Code and RFID Card Reader IDTS-QR-36. It is a wall-mounted access reader for QR codes, barcodes and EM or MIFARE cards with Wiegand, RS485, RS232 and TTL output, not a UHF reader.

Frequently asked questions

Can a desktop reader write (encode) UHF tags as well as read them?
Yes. The UDR-111, 103, 120L and 107SL are reader-writers: they read the EPC and can write your own data into EPC Gen2 tags. The 120L adds a free utility that imports data from Excel for bulk encoding, and the 107SL can also lock and kill tags.
How do I encode thousands of tags quickly?
Feed the data from a file instead of typing it tag by tag. The 120L (₹28,000 + GST) comes with a free utility that imports an Excel sheet and writes each row into the next tag placed on the reader. The 103 (₹15,000 + GST) reads and writes EPC Gen2 tags with no driver to install, which suits smaller batches and checking encoded tags. If the labels also need printed text or barcodes, the IT4RL desktop RFID printer (₹1,35,000 + GST) prints and encodes up to 6,000 labels an hour from Excel or CSV files with its free Identium TagSmith software. At a desk, turn the RF power down so only the tag on the reader is written.
How do I get tag numbers into Excel without writing software?
Use a reader with HID keyboard mode, such as the UDR-111. The PC sees it as a keyboard, so each tag number is typed into whichever cell or field has the cursor.
Will a UHF desktop reader read my office access card?
Only if it is a UHF card. Most office access cards are 125 kHz or 13.56 MHz, which UHF readers cannot read. For UHF access credentials, see UHF RFID cards.
Which desktop reader is BIS approved?
The 103 (model 103UDR) is BIS approved.
Do the smart trays need a PC?
The Bluetooth jewellery tray connects to an Android or iOS phone or tablet and runs on its own battery. The CX110T and CX111T connect over PoE, USB or RS232 to a PC or your network and have relay outputs for external devices.

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.