Identium UHF RFID PCB Tag P5313-35 | H9 | 53×13×3.5mm

The Identium RFID PCB Tag P5313-35 is a compact UHF on-metal PCB tag. Rectangular form factor (53×13×3.5mm) with H9 chip, offering a read range of up to 400cm, aperture 3.5mm.

Specifications

About the Identium UHF RFID PCB Tag P5313-35

How much tag do you actually need on metal? For most Indian plant and warehouse work the honest answer is a mid-size one, and the Identium UHF RFID PCB Tag P5313-35 sits exactly there. Its 53×13×3.5 mm body is large enough to deliver up to 400 cm of read range from a metal surface, yet compact enough to fit a motor terminal box, a panel door or an equipment nameplate without overhanging. The H9 chip handles EPC Class 1 Gen2 / ISO 18000-6C encoding, and a 3.5 mm aperture lets you bolt or rivet the tag down for good. Identium manufactures this RFID PCB tag in India for asset registers that have to survive years of plant life.

Key specifications

Best-fit applications

• Preventive-maintenance rounds on motors, compressors, pumps and DG sets
• Electrical panel, MCC and switchgear asset numbering for statutory audits
• HVAC units, chillers and AHUs spread across a campus or multi-floor building
• Biomedical equipment registers in hospitals, where trolleys and frames are metal
• Laboratory and testing instruments under periodic calibration control
• Plant fixed-asset verification replacing barcode nameplates that no longer scan

Mounting, encoding and reading notes

Bolt or rivet the tag through its 3.5 mm aperture onto a clean, flat patch of metal; if the only free area is textured or painted heavily, level it with an adhesive bed so the base sits flush. Space adjacent tags apart rather than clustering them, because closely packed on-metal tags detune one another and cause missed reads. If a tag reads short in the field, check for a hidden air gap, an off-axis approach angle, or a nearby liquid-filled vessel before blaming the tag. Encode the EPC and print the matching asset number before installation.

Why buy from Identium

Made in India since 2010, BIS and WPC certified, and tuned so the same part works on 865-868 MHz here and 865-868 MHz ETSI abroad — one SKU for domestic sites and export projects. Identium supports volume and OEM supply, custom EPC encoding and evaluation samples. Compare the wider UHF RFID tags range, and if reads are inconsistent on site our RFID troubleshooting guide is the fastest place to start.

Frequently asked questions

What is the read range of the Identium P5313-35 on-metal RFID tag?

The Identium P5313-35 UHF RFID PCB tag reads up to 400 cm when mounted on metal. The distance achieved depends on reader power, antenna gain and the metal surface. The 53 by 13 by 3.5 mm tag uses the H9 chip and EPC Class 1 Gen2 / ISO 18000-6C.

Does this UHF RFID PCB tag read reliably on metal?

Yes, the P5313-35 is an on-metal UHF RFID PCB tag designed to be fixed directly onto metal assets, with a 3.5 mm aperture for screw or bolt mounting. Standard paper and label RFID tags do not read reliably on metal, which is where such anti-metal tags are used.

Is this tag compatible with Indian UHF RFID readers?

Yes. The P5313-35 UHF RFID PCB tag covers 860 to 960 MHz, which includes the 865 to 868 MHz UHF band approved by WPC in India and licence-free within notified power limits. It reads with any EPC Class 1 Gen2 handheld or fixed reader used in India.

What is the price of this long range RFID tag in India?

The price of the P5313-35 long range on-metal UHF RFID PCB tag in India depends on order quantity, so refer to the listed price or request a bulk quote. India RFID Store is an Indian RFID manufacturer offering bulk and OEM pricing, custom encoding and samples.

Related guides & resources

• Browse all RFID PCB and Ceramic Tags
• Read: choosing on-metal RFID tags
• Read: RFID for manufacturing & WIP tracking
• Manufacturing case study: manufacturing case study