Identium UHF RFID PCB Tag P8020-35 | H9/781 | 80×20×3.5mm

The Identium RFID PCB Tag P8020-35 is a compact UHF on-metal PCB tag. Rectangular form factor (80×20×3.5mm) with H9/781 chip, offering a read range of up to 600cm, aperture 3.5mm.

Specifications

About the Identium UHF RFID PCB Tag P8020-35

The Identium UHF RFID PCB Tag P8020-35 pairs the NXP H9/781 chip with an 80×20×3.5 mm PCB body, and the combination is aimed at one job: dependable long-distance reads from metal. It is specified at up to 600 cm on a metal surface, with a 3.5 mm mounting aperture so it can be bolted down and forgotten. The extra length over the shorter models in this family gives the antenna more room, which pays off when assets are read from an aisle, a gate or across a yard rather than at arm's length. Identium manufactures this on metal UHF tag in India for the 865-868 MHz band.

Key specifications

Best-fit applications

• Container, skid and heavy fabrication tracking in open yards and stockyards
• Transformers, DG sets and switchgear on utility and industrial asset registers
• Steel coil, plate and bar racks counted from a distance during stock audits
• Earthmoving attachments, jigs and heavy tooling in rental and EPC fleets
• Metal tote cages read automatically at a plant gate or weighbridge lane
• Rail and port equipment where handhelds cannot get close to the asset

Mounting, encoding and reading notes

Bolt the tag through the 3.5 mm aperture, tightening only until the base is firmly seated — over-torquing a rigid PCB body risks cracking it, and a washer spreads the load. Choose a flat, unobstructed face pointing towards the read zone; a tag tucked behind a beam will read far short of 600 cm. During commissioning, map read points and RSSI along the actual travel path, and set reader power to the minimum that gives reliable reads so you do not pick up neighbouring assets. Encode and label each tag before it leaves the stores.

Why buy from Identium

Identium has manufactured RFID hardware in India since 2010 and is BIS and WPC certified, with ETSI-compatible tuning that lets the same tag serve export projects on 865-868 MHz. Ask us about volume and OEM supply, custom encoding and samples for testing. Browse the wider UHF RFID tags range, and to size up a rollout see our RFID tag buying guide for India.

Frequently asked questions

What is the read range of the Identium P8020-35 UHF RFID PCB tag?

The Identium IDTS-P8020-35 UHF RFID PCB tag has a listed read range of up to 600 cm. It uses an H9/781 chip on the EPC Class 1 Gen2 / ISO 18000-6C protocol across 860-960 MHz, which covers India's 865-868 MHz UHF band. Actual range varies with the reader, antenna and mounting surface.

Does this UHF RFID PCB tag work on metal surfaces?

Yes, the P8020-35 is an on-metal UHF RFID PCB tag meant to be mounted directly on metal tools, machines and assets. Ordinary paper or label tags detune on metal and do not read reliably, so on-metal PCB tags like this 80 × 20 × 3.5 mm model are used for metal asset tracking in India.

What is the price of a UHF RFID PCB tag in India?

Pricing for UHF RFID PCB tags in India depends on quantity, chip and any custom encoding, so please check the price listed on this page or ask for a bulk quotation. India RFID Store is part of Identium, a BIS and WPC certified Indian RFID manufacturer offering bulk and OEM pricing with pan-India shipping.

Can the P8020-35 PCB tag be screw mounted and supplied in bulk?

Yes, the IDTS-P8020-35 UHF RFID PCB tag has a 3.5 mm aperture for screw or cable-tie mounting, and it is available in bulk quantities across India. Identium manufactures these on-metal tags in India and supplies samples, custom encoding and OEM volumes with pan-India delivery.

Related guides & resources

• Browse all RFID PCB and Ceramic Tags
• Read: choosing on-metal RFID tags
• Read: RFID for manufacturing & WIP tracking
• Manufacturing case study: manufacturing case study