RFID-Blocking Card for Wallets (13.56 MHz NFC Shield, CR80)
Price on request
Min. order 500 pcs
Identium
RFID-Blocking Sleeve for Passports and Cards (Aluminium-Laminated Paper)
A paper sleeve laminated with aluminium foil that shields a contactless card or an e-passport chip at 13.56 MHz while the document is inside. Supplied in card and passport sizes, printable with your artwork for bank kits, travel agencies and corporate gifts.
Price on request
Min. order 500 piecesThe final price for your quantity is confirmed in the quote
Choose a size
Optional: you can also confirm it in the quote
- 7-day replacement · 1-year warranty against manufacturing defects
- Blue Dart next-day delivery
Key features
- Shields the 13.56 MHz chip of a contactless card or e-passport while inside the sleeve
- Card size 90 × 63 mm; passport size 135 × 95 mm
- Aluminium-laminated paper or Tyvek, typical for the class
- Printable with logo and instructions
- Does not shield 125 kHz cards or UHF tags
Overview
A sleeve for one card or one passport
A contactless card or an e-passport only answers a reader while its chip is exposed; a sleeve with an aluminium layer wraps it so the chip stays silent until the document is pulled out. The card size fits a standard CR80 bank, metro or access card; the passport size fits an Indian or other standard passport booklet. Like the blocking card, it works at 13.56 MHz only: 125 kHz cards and UHF tags such as FASTag are not affected, and a windshield tag is in any case never in a sleeve.
Who orders them
A bank can add one to the welcome kit of a new contactless card, a travel agency or visa service can hand them out with passports, and a company can print them with a logo as a practical gift. The sleeve prints with your artwork and a line of instructions. For the real level of risk from skimming, and whether a sleeve is worth carrying, see the RFID data security guide.
Ordering
Choose the card or passport size with the size picker; mixed orders are fine. Sleeves follow the consumables rule: minimum order 500 pcs. Request a quote with the size, quantity and artwork. Card holders, lanyards and the blocking card are listed with the other RFID accessories.
Where to use the RFID-Blocking Sleeve for Passports and Cards (Aluminium-Laminated Paper)
- Bank card-onboarding kits
- Travel agencies and visa services
- Corporate gifting
- Hotel key-card wallets
Specifications
Datasheet (PDF)| Size | Card 90 × 63 mm / Passport 135 × 95 mm |
|---|---|
| Material | Aluminium-laminated paper or Tyvek, typical for the class |
| Shields | 13.56 MHz (ISO 14443) chips while the card or passport is inside |
| Does not shield | 125 kHz cards or UHF tags |
| Printing | Logo and instructions, optional |
| Closure | Open-ended slip sleeve, typical for the class |
Frequently asked questions
Does the sleeve block an e-passport?
Yes, while the passport is inside it. The chip in an e-passport works at 13.56 MHz, the frequency the sleeve shields. Take the passport out at immigration so the officer's reader can read it.
How is it different from the blocking card?
The sleeve wraps one card or passport on its own; the blocking card sits in a wallet and shields the cards beside it. Both work at 13.56 MHz only. A gifting kit can include one of each.
How do I test it?
Hold an NFC phone to the card to confirm it reads, then slide the card into the sleeve and try again: the phone should no longer read it. The same test works with an e-passport held against the phone.
Related products
NFC Card 13.56 MHz (NTAG, MIFARE Classic, DESFire, ICODE SLIX)
₹20 + GST
Min. order 500 pcs
ID Card Holder with Lanyard for RFID Cards (CR80, Vertical / Horizontal)
Price on request
Min. order 500 pcs
RP-SMA to SMA Adapter for RFID Readers and Antennas
Price on request
Per piece
Spare Battery for CX1500N UHF Handheld Reader, 10,000 mAh
Price on request
Per piece
Retractable Badge Reel for RFID Access Cards
Price on request
Min. order 500 pcs
Thermal-Transfer Ribbon, Resin, 110 mm × 300 m, for Synthetic RFID Labels
Price on request
Per piece