Skip to content
India RFID Store

RFID Marathon Bibs
Brand IdentiumAvailability In Stock

RFID Marathon Bibs

A race number bib with a built-in UHF RFID chip, printed with the runner's number, event branding and sponsor logos. The bib itself is the timing tag, so participants need no separate shoe tag.

Brand:
Identium
Chip:
Impinj Monza R6
Protocol:
UHF EPC Gen 2
Datasheet:
PDF · 171 KB
Listing updated:

₹30

per piece + 18% GST

Min. order 500 piecesThe final price for your quantity is confirmed in the quote

  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

Key features

  • Impinj Monza R6 chip, UHF EPC Gen 2
  • Tyvek or polyester bib
  • Full-colour print: race number, event branding, sponsor logos
  • No separate shoe tag to fit, lose or return
  • Faces forward towards the finish-line antennas
  • Optional printed barcode as a manual-scan backup

Overview

What is a timed bib?

A timed bib is a race number with a timing chip built in. Our bibs carry a UHF RFID chip (Impinj Monza R6): antennas at the start, split points and finish read it as the runner crosses, and each crossing is time-stamped to give the runner a chip time. A bib without a chip is not timed.

Why choose a UHF RFID marathon bib over a shoe tag

The bib does two jobs: it shows the race number to marshals, photographers and spectators, and its built-in UHF chip is read automatically by antennas at each timing point. Runners pin it on the chest as usual, so there is no separate shoe tag to fit, lose or return.

  • The bib faces forward, towards the finish-line antennas, which helps read reliability.
  • It works for running, cycling (when worn) and obstacle events.
  • A printed barcode can be added as a backup for manual scanning.

Material, chip and print

Bibs are made in Tyvek or polyester and carry an Impinj Monza R6 chip (UHF EPC Gen 2). Each one is printed in full colour with the race number, event branding and sponsor logos. When ordering, send the number range, the artwork and the colour for each distance, so every chip can be matched to its printed number in your registration data.

Reading the bibs on race day

Ask runners not to fold the bib or hide it under a jacket. Pair the bibs with a UHF RFID mat antenna or other timing antennas from the race timing range, and see the organiser's guide for planning start, split and finish points.

Where to use the RFID Marathon Bibs

  • Marathons
  • Half marathons
  • 10K and 5K runs
  • Cycling events
  • Obstacle races
  • Corporate runs

Specifications

Datasheet (PDF)
ChipImpinj Monza R6
ProtocolUHF EPC Gen 2
MaterialTyvek or polyester
PrintingFull colour: race number, event branding, sponsor logos
Backup IDPrinted barcode (optional)

Frequently asked questions

Do runners need a shoe tag as well as the RFID bib?
No. The UHF chip is built into the bib, so the bib is the timing tag. Runners only need to wear it on the chest, flat and unfolded.
What is a timing chip in a marathon?
A small RFID tag carried by each runner. Antennas or mats at the start, split points and finish read it as the runner crosses, and each crossing is recorded against that runner. In this bib the chip, an Impinj Monza R6 (UHF EPC Gen 2), is built into the race number; it can also be a separate disposable shoe tag or a timing label fixed to the bib.
How much does a timing chip cost?
It depends on the format. In our catalogue: the RFID marathon bib with the chip built in, ₹30 + GST each (MOQ 500 pcs); the RT6-P race timing label, ₹30 + GST each (MOQ 500 pcs); the disposable IDTS-LSTH3 shoe tag, ₹25 + GST each (MOQ 500 pcs); and the battery-operated race timing tag, ₹300 + GST each (MOQ 500 pcs). If you would rather not buy hardware, the managed race timing service costs ₹150 + GST per participant, with the tagged bibs, antennas and readers included.
Which chip is in the bib?
An Impinj Monza R6, a UHF EPC Gen 2 chip, so it can be read by UHF RFID timing readers and antennas.
Can the bibs be printed with our race numbers and sponsor logos?
Yes. Bibs are printed in full colour with race numbers, event branding and sponsor logos, and a barcode can be added as a backup for manual scanning.
What material are the bibs made of?
Tyvek or polyester. Mention your preference, the bib size and the number range when you request a quote.
Can the bibs be used for cycling events?
Yes, as long as the rider wears the bib where it faces the timing antennas, for example on the chest and not under a jacket.

Used in these RFID solutions

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.