Skip to content
India RFID Store

HF RFID Cable Tie Tag for i3MS Mine Sampling Bags
Brand IdentiumAvailability In Stock

HF RFID Cable Tie Tag for i3MS Mine Sampling Bags

An RFID cable tie tag used to close and identify mineral sampling bags under Odisha’s i3MS system, where RFID tagging of sampling bags at iron ore and chromite mines replaced QR codes from 15 June 2023. Available in four colours.

Brand:
Identium
Frequency:
13.56 MHz (HF)
Datasheet:
PDF · 166 KB
Listing updated:

₹40

per piece + 18% GST

Min. order 500 piecesThe final price for your quantity is confirmed in the quote

  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery
  • Samples ₹250 (1–2 pcs, incl. shipping) · request a sample of this tag

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

Key features

  • Cable tie with an RFID tag head: closes and tags a sampling bag in one step
  • Used for i3MS sampling-bag tagging at Odisha iron ore and chromite mines
  • RFID tagging of sampling bags mandatory from 15 June 2023
  • Four colours: red, blue, green and white

Overview

RFID cable tie tag for i3MS sampling bags

Lessees of iron ore and chromite mines in Odisha tag their mineral sampling bags through the state’s i3MS system. RFID-based tagging of sampling bags became mandatory from 15 June 2023, and QR code-based tagging was deactivated on the same date. The requirement follows the operational guidelines for stacking, sampling and chemical analysis issued under the OMPTS (Amendment) Rules, 2021 (dated 28 April 2021 and 7 March 2022).

This tag combines a cable tie with an RFID tag head, so closing the bag and tagging it happen in a single action.

How it is used at the mine

  1. Close the bag. Pass the tie around the bag neck and pull it tight through the tag head.
  2. Register the tag. Read the tag and record the sample against its ID as your i3MS procedure requires.
  3. Track the sample. The tag ID stays with the bag from the stack to the laboratory.

Choosing colours

Red, blue, green and white tags let a site tell sample batches apart at a glance. Tags are supplied in sets with an equal number of each colour; tell us how many sets you need when you request a quote. Current notices are on the Odisha i3MS portal. For despatch-side compliance, read GPS and RFID for mineral transport vehicles; for general cable and asset tagging at longer range, see the UHF RFID cable tie tag.

Where to use the HF RFID Cable Tie Tag for i3MS Mine Sampling Bags

  • Mine sampling bags
  • Iron ore sampling
  • Chromite sampling
  • Sample chain of custody

Specifications

Datasheet (PDF)
Frequency13.56 MHz (HF)
Form factorCable tie with RFID tag head
ColourRed, blue, green, white
Typical usei3MS sampling bags, Odisha iron ore and chromite mines
PackagingColour sets (equal quantity per colour)

Frequently asked questions

Is RFID tagging of sampling bags mandatory in Odisha?
Yes, for the lessees concerned. Under Odisha’s i3MS system, RFID-based tagging of sampling bags at iron ore and chromite mines became mandatory from 15 June 2023, and QR code-based tagging was deactivated on the same date. It follows the operational guidelines for stacking, sampling and chemical analysis under the OMPTS (Amendment) Rules, 2021. Check the i3MS portal for current notices.
Which colours are available?
Red, blue, green and white. Tags are supplied in sets with an equal number of each colour.
How is the tag fixed to a sampling bag?
Like a normal cable tie: pass the tie around the neck of the bag and pull it through the tag head until it is tight. The tag then stays with the bag through handling and analysis.
How do I order for my mine?
Add the tags to your quote list or contact us with your mine details and the number of sets you need.

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.