Identium UHF RFID PCB Tag P2908-12 | H9 | 29×8×1.2mm

The Identium RFID PCB Tag P2908-12 is a compact UHF on-metal PCB tag. Rectangular form factor (29×8×1.2mm) with H9 chip, offering a read range of up to 150cm.

Specifications

About the Identium UHF RFID PCB Tag P2908-12

Only 1.2 mm thick, the Identium UHF RFID PCB Tag P2908-12 is the low-profile member of this on-metal PCB range — long and narrow at 29×8×1.2 mm, with an H9 chip and no mounting hole, so it bonds flush where a raised tag would catch on a hand, a hose or a closing panel. Range reaches 150 cm, which is ample for handheld audits down an aisle or along a line. Produced by a UHF RFID PCB tag manufacturer in India, it speaks EPC Class 1 Gen2 / ISO 18000-6C over 860–960 MHz, covering 865-868 MHz in India and 865-868 MHz under ETSI.

Key specifications

Best-fit applications

• Server, switch and patch panel faces in a data centre where rack clearance is tight
• Metal drawer fronts and cabinet doors in a tool or spares store
• Slim metal frames on medical devices, monitors and infusion pumps
• Battery packs, inverters and metal-cased power electronics on an asset list
• Aluminium extrusion profiles and machine guards on a production line

Mounting, encoding and reading notes

A thin unperforated board lives or dies by its bond. Clean and dry the surface, then lay down a structural epoxy or high-strength acrylic pad with even pressure along the whole 29 mm length so no corner is left proud. The board is rigid by design, so do not flex it to follow a curve. Choose an outward-facing surface rather than a recess behind a metal lip. Encode the H9 chip at a desktop reader first and verify every tag once it is fitted, because lifting it off again is not part of the plan.

Why buy from Identium

Identium has built RFID in India since 2010 and ships the same tags to Indian sites and to customers reading them on European equipment. Volume and OEM supply, pre-encoding and evaluation samples let you qualify both adhesion and range on your own assets. See the full RFID PCB and ceramic tags range, and if you are exporting, read our ETSI 865-868 MHz compatibility guide.

Frequently asked questions

How thin is the Identium P2908-12 UHF RFID PCB tag?

The Identium P2908-12 UHF RFID PCB tag measures 29 by 8 by 1.2 mm, making it one of the slimmest on-metal tag formats. The low profile lets it sit on tools, panels and metal assets where a thicker tag would foul against handling or fixtures.

What is the read range of this slim on-metal RFID tag?

The P2908-12 slim UHF RFID PCB tag reads up to 150 cm on metal. Range depends on reader power, antenna gain and the metal surface it is bonded to. The tag uses the H9 chip and works on EPC Class 1 Gen2 / ISO 18000-6C over 860 to 960 MHz.

Does this UHF RFID tag operate on India's licence-free band?

Yes. The P2908-12 UHF RFID PCB tag covers 860 to 960 MHz, which includes the 865 to 868 MHz band approved by WPC in India and licence-free within notified power limits. No separate frequency version is required for Indian readers or deployments.

Can I get these slim RFID tags in bulk with custom encoding?

Yes, the P2908-12 slim on-metal UHF RFID PCB tag is available in bulk and can be supplied pre-encoded with your asset numbers. Pricing depends on quantity, so check the listed price or request a bulk quote from India RFID Store, an Indian manufacturer shipping pan-India.

Related guides & resources

• Browse all RFID PCB and Ceramic Tags
• Read: choosing on-metal RFID tags
• Read: RFID for manufacturing & WIP tracking
• Manufacturing case study: manufacturing case study