Identium UHF RFID PCB Tag P1207-25 | M4QT | 12×7×2.5mm

The Identium RFID PCB Tag P1207-25 is a compact UHF on-metal PCB tag. Rectangular form factor (12×7×2.5mm) with M4QT chip, offering a read range of up to 80cm.

Specifications

About the Identium UHF RFID PCB Tag P1207-25

The P1207-25 is the largest rectangle in this family and the longest-reading of them: a 12x7x2.5 mm M4QT on-metal UHF tag rated up to 80 cm against steel or aluminium. The extra board area is what lifts it clear of the smaller rectangular tags in the range, and it makes the tag practical for equipment scanned from a walkway rather than at arm's length. Identium supplies it to Indian data centres, hospitals, cylinder operators and rental fleets that need a bonded, low-profile identity on a metal enclosure or frame.

Key specifications

Best-fit applications

• Server racks, switches and enclosures in a data centre audit
• Hospital beds, trolleys and metal equipment frames on ward rounds
• Gas cylinders and metal drums tracked through a distribution loop
• Rental and event equipment cases checked out from a store
• HVAC panels and control cabinets on a facility inspection route
• Metal WIP pallets and carriers on a production line

Mounting, encoding and reading notes

With no aperture on this model, bond the tag with structural epoxy or a heavy industrial double-sided tape onto a degreased flat panel, pressing the whole footprint down so no corner lifts. Avoid mounting across a joint or a curved rib, which will cost range. Encode the tags on a desktop UHF reader before the assets are issued and watch tag spacing in a rack, because at 80 cm a handheld sweep will happily pick up the shelf above. Standardise the mounting position per asset class for repeatable audits.

Why buy from Identium

Identium is an Indian RFID manufacturer, in business since 2010. This tag is made in India and tuned for 865-868 MHz, the same band ETSI uses, so exports need no change of part. Ask about bulk and OEM pricing, custom encoding and samples. Browse on-metal RFID tags or, if you are importing, read our guide to buying RFID tags from India.

Frequently asked questions

What is the read range of the Identium P1207-25 UHF RFID PCB tag?

The Identium P1207-25 UHF RFID PCB tag has a read range of up to 80 cm on metal. The distance you get depends on reader power, antenna gain and the metal surface it is mounted on. It uses the M4QT chip on EPC Class 1 Gen2 / ISO 18000-6C.

Can this PCB tag be used on metal tools and dies?

Yes, the P1207-25 is an on-metal UHF RFID PCB tag intended for tools, dies, moulds and other metal assets. Standard paper or label tags will not read reliably on metal, so a compact anti-metal PCB tag measuring 12 by 7 by 2.5 mm is used instead.

What is the price of this on-metal RFID tag in India?

The price of the P1207-25 on-metal UHF RFID PCB tag in India depends on the quantity ordered, so refer to the listed price or request a bulk quote. India RFID Store is an Indian RFID manufacturer offering bulk and OEM pricing along with samples for evaluation.

Does the P1207-25 support the EPC Gen2 standard used in India?

Yes. The P1207-25 UHF RFID PCB tag follows EPC Class 1 Gen2 / ISO 18000-6C and operates across 860 to 960 MHz, which includes the 865 to 868 MHz band approved by WPC in India. It reads with any Gen2 handheld or fixed reader used in the country.

Related guides & resources

• Browse all RFID PCB and Ceramic Tags
• Read: choosing on-metal RFID tags
• Read: RFID for manufacturing & WIP tracking
• Manufacturing case study: manufacturing case study