
Identium UHF Portable Reader UCR10
A pocket-sized UHF RFID reader that plugs straight into the USB Type-C port of an Android phone, tablet or USB-C iPhone and runs on its power, for stock counts and asset audits up to 1.5 m.
- Model:
- UCR10
- Brand:
- Identium
- Frequency:
- 860–960 MHz (covers India's 865–868 MHz band)
- Protocol:
- EPC Class 1 Gen 2
- Interface:
- USB Type-C (plugs into the host device)
- Read range:
- Up to 1.5 m
- Datasheet:
- PDF · 212 KB
- Listing updated:
₹12,000
per piece + 18% GST
₹14,160 incl. GST
Min. order 1 pieceRequest a quote and pay by NEFT or UPI against the quotation
- 7-day replacement · 1-year warranty against manufacturing defects
- Blue Dart next-day delivery
- Ordered by quotation · in-stock items are dispatched the same day after payment · shipping is shown in your quotation
Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.
Key features
- Plugs into USB Type-C: Android 7.0+ and USB-C iPhones on iOS 17+
- No battery to charge; powered by the connected phone or tablet
- Reads EPC Class 1 Gen 2 UHF tags at up to 1.5 m
- 860–960 MHz, which covers India's 865–868 MHz band
- Under 80 g, small enough to carry in a pocket
- Android SDK for adding RFID reading to your own app
Overview
What the UCR10 Type-C UHF reader does
The UCR10 is a plug-in UHF RFID reader for phones and tablets. It goes into the USB Type-C port the way a charging cable would, takes its power from the device and turns the phone into a UHF scanner with a range of up to 1.5 m. There is no Bluetooth pairing and no second battery to keep charged.
Plug-in or Bluetooth: the trade-off
Why teams choose the UCR10
Nothing to pair or charge, under 80 g, and it travels in a pocket. It suits staff who scan a few times a day as part of other work.
What to plan for
The reader draws on the phone's battery, and the Type-C port is in use while scanning. For long, continuous counts, a Bluetooth reader with its own battery may suit better.
Phones and apps
The UCR10 works with Android 7.0 or later and with USB-C iPhones running iOS 17 or later. Android phones generally need USB host (OTG) support to run plug-in accessories, which most current phones and tablets have. An Android SDK is available so your developers can add RFID reading to an existing stock or asset app; for an iPhone rollout, confirm the app route with us when you ask for a quote.
Typical UCR10 set-ups
- Stock counting in retail stores and backrooms, on a phone staff already carry.
- Receiving: confirm tagged cartons on an incoming shipment at the dock.
- Fixed asset audits: walk an office or plant and check tagged assets against the register.
- Field service: identify equipment at a customer site without carrying dedicated hardware.
Our guide sled vs USB-C vs handheld compares this approach with other phone readers, and the full line-up is under RFID handheld readers.
Where the UCR10 is used
- Retail stock counting
- Goods receiving checks
- Fixed asset audits
- Field service visits
Product videos
Specifications
Datasheet (PDF)| Frequency | 860–960 MHz (covers India's 865–868 MHz band) |
|---|---|
| Protocol | EPC Class 1 Gen 2 |
| Interface | USB Type-C (plugs into the host device) |
| Compatible with | Android 7.0 and above; USB-C iPhones on iOS 17 and above |
| Power | From the host device's USB Type-C port; no internal battery |
| Read range | Up to 1.5 mEstimate range for your set-up → |
| Weight | Under 80 g |
| Software | Android SDK |
Software, SDK and manuals
3 downloads for the UCR10.
UCR10 Flow — Type-C Reader App Android app
Android · .apk · 7.8 MBDownloadUCR10 Type-C Reader — SDK SDK
USB-C SDK · 1.0 MBDownloadUCR10 Type-C Reader — User Manual Manual
PDF · Manual · 1.7 MBDownload








