Skip to content
India RFID Store

UHF Nano On-Metal IT Asset Tag MNTH3 (38.5 × 14 mm)
Brand IdentiumAvailability In Stock

UHF Nano On-Metal IT Asset Tag MNTH3 (38.5 × 14 mm)

A 2 g UHF nano tag, 38.5 × 14 × 3.5 mm, for tagging servers, network gear, hard drives, backup tapes and small tools. It is built for metal surfaces and fixes with adhesive or a cable tie.

Brand:
Identium
Frequency:
865–868 MHz (902–928 MHz on request)
Protocol:
EPC Class 1 Gen 2
Chip:
Alien Higgs 3 (other chips on request)
Datasheet:
PDF · 178 KB
Listing updated:

₹50

per piece + 18% GST

Min. order 500 piecesThe final price for your quantity is confirmed in the quote

  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery
  • Samples ₹250 (1–2 pcs, incl. shipping) · request a sample of this tag

Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.

Key features

  • 38.5 × 14 × 3.5 mm and 2 g, sized for small IT assets and tools
  • Good read range on metal surfaces (reader dependent)
  • Attach with adhesive, or with a cable tie through the mounting hole
  • Alien Higgs 3, EPC Gen2: 96-bit EPC (up to 480 bits), 512-bit user memory
  • IP54 casing; operates from −40 °C to +85 °C

Overview

A UHF nano tag sized for IT assets

Many hard tags are too bulky for a hard drive, a tape cartridge or a 1U network switch. The MNTH3 is 38.5 × 14 mm, 3.5 mm thick and weighs 2 g, so it sits on the edge of a server faceplate, a drive caddy or a tape without getting in the way of handling. It is built to read well on metal surfaces, which matters in a rack full of steel chassis.

Where it is used

  • Server rooms and data centres: servers, routers and network hardware.
  • Media control: backup tapes, hard drives and media tapes moving in and out of storage.
  • Tool rooms and production: small tools and manufacturing equipment.

With a tag on each item, an audit becomes a walk past the racks with a reader instead of checking serial labels one by one. Our fixed asset audit guide explains how such a rollout is planned.

Fixing and encoding

Attach the tag with adhesive on clean, flat surfaces, or loop a cable tie through its mounting hole where adhesive will not hold, such as cable bundles or textured casings. The Alien Higgs 3 chip carries a 96-bit EPC (extendable to 480 bits) and 512 bits of user memory, enough for an asset number plus a short record. The tag is passive, so there is no battery to replace. Read range depends on the reader; a UHF handheld reader is the usual choice for IT audits.

Where to use the UHF Nano On-Metal IT Asset Tag MNTH3 (38.5 × 14 mm)

  • Server tracking
  • Network routers
  • Hard drives
  • Backup and media tapes
  • Small tool inventory
  • Manufacturing equipment

Specifications

Datasheet (PDF)
ModelIDTS-MNTH3
Frequency865–868 MHz (902–928 MHz on request)
ProtocolEPC Class 1 Gen 2
ChipAlien Higgs 3 (other chips on request)
MemoryEPC 96 bits, extendable to 480 bits; user memory 512 bits
Data retention50 years
Write endurance100,000 cycles
Dimensions38.5 × 14 × 3.5 mmSee this size at actual size →
Weight2 g
MaterialABS, polyester
MountingAdhesive, or cable tie through mounting hole
IP ratingIP54
Operating temperature−40 °C to +85 °C
Storage temperature−40 °C to +85 °C
Operating modePassive (no battery)

Frequently asked questions

Does the MNTH3 work on metal servers and racks?
Yes. It is a metal-mount tag with good read range on metal surfaces, where standard paper labels fail. The exact distance depends on the reader and antenna you use.
How is the nano tag attached to an asset?
With adhesive on a clean, flat surface, or with a cable tie through its mounting hole where adhesive is unsuitable.
Which chip and memory does it use?
An Alien Higgs 3 EPC Class 1 Gen 2 chip with a 96-bit EPC (extendable to 480 bits) and 512 bits of user memory, 50-year data retention and 100,000 write cycles. Another chip can be used on request.
Is it suitable for India’s UHF band?
Yes. The standard version works on 865–868 MHz, India’s licence-exempt UHF band. A 902–928 MHz version, as used in the USA and some other countries, is available on request.
Can it be used outdoors or in washdown areas?
The ABS and polyester casing is rated IP54, which covers dust and splashes, and the tag works from −40 °C to +85 °C. For washdown or outdoor exposure, choose an IP67 or IP68 tag from our on-metal tag range.

Used in these RFID solutions

Related products

All UHF RFID Tags →

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.