UHF 12dBi Circular Antenna
₹11,000 + GST
Per piece_Z1BHfBd.webp)
Model IDTS-ULABrand IdentiumAvailability In Stock
UHF RFID Low-Gain Antenna IDTS-ULA (0–2 m Read Zone)
A compact 108 × 98 mm low-gain UHF RFID antenna with an omni-directional 0–2 m read zone across 860–960 MHz, for indoor point-of-read spots such as counters, desks and shelves where reads must stay close.
- Model:
- IDTS-ULA
- Brand:
- Identium
- Frequency:
- 860–960 MHz
- Protocol:
- ISO 18000-6C (EPC Class 1 Gen2), ISO 18000-6B
- Frequency hopping:
- FHSS
- Read range:
- 0–2 m, omni-directional
- Datasheet:
- PDF · 190 KB
- Listing updated:
₹6,000
per piece + 18% GST
₹7,080 incl. GST
Min. order 1 pieceBuy online and pay by NEFT or UPI, or request a quote
- 7-day replacement · 1-year warranty against manufacturing defects
- Blue Dart next-day delivery
- Buy online, pay by NEFT or UPI · in-stock items are dispatched the same day after payment · shipping ₹300 per kg + GST
Sold by India RFID Store, the online catalogue of Identium Tech Solutions Pvt Ltd, an RFID manufacturer in New Delhi, India, in business since 2010.
Key features
- Omni-directional read zone of 0–2 m for close, contained reads
- 860–960 MHz, covering India's 865–868 MHz UHF band
- Works with ISO 18000-6C (EPC Gen2) and ISO 18000-6B tags
- RF output adjustable from 0 to 3 dBm to tune the zone
- Compact 108 × 98 mm, IP40, for indoor installation
- Free demonstration software and SDK provided
Overview
What the IDTS-ULA low-gain UHF antenna does
Most UHF RFID antennas are bought for distance. The IDTS-ULA is bought for the opposite reason: its low gain and omni-directional pattern give a read zone of 0–2 m around the antenna, so the reader picks up the tags placed at a counter or on a desk and ignores the stock a few metres away.
At 108 × 98 mm, it is small enough to sit on a desk, beside a billing terminal or on a shelf without getting in the way.
Tuning the read zone
The spec sheet lists an RF output adjustable from 0 to 3 dBm, which lets you shrink or extend the zone within that 0–2 m range to match the counter or shelf. It covers 860–960 MHz with FHSS frequency hopping, which takes in India's 865–868 MHz band, and works with ISO 18000-6C (EPC Gen2) and ISO 18000-6B tags. Free demonstration software and an SDK are provided for testing and integration.
Where a low-gain antenna fits
- Billing and issue counters: reading only the items placed in front of the operator.
- Desks and workstations: checking tagged files, tools or samples in and out.
- Shelf read points: confirming items at one location without cross-reads from the next bay.
For long distances, gates or dock doors, a high-gain circular panel is the better match. For a slimmer antenna that fits along a shelf edge, see the SY702 low-gain strip antenna.
Installation notes
The IDTS-ULA is rated IP40, so install it indoors, away from water and heavy dust. It operates from −20 °C to +60 °C at up to 80% non-condensing humidity. RF cables and connectors are not included, so tell us your reader's antenna port type and the cable length you need when you request a quote.
To compare gain and read-zone options, read our RFID antenna guide or browse the full RFID antenna range.
Where the IDTS-ULA is used
- Billing counters
- Issue and return desks
- Shelf read points
- Item check-in stations
Specifications
Datasheet (PDF)| Frequency | 860–960 MHz |
|---|---|
| Protocol | ISO 18000-6C (EPC Class 1 Gen2), ISO 18000-6B |
| Frequency hopping | FHSS |
| RF output | 0–3 dBm, adjustable |
| Read range | 0–2 m, omni-directional |
| Dimensions | 108 × 98 mm |
| IP rating | IP40 |
| Humidity | Up to 80% non-condensing |
| Operating temperature | −20 °C to +60 °C |
| Compliance | CE, FCC |
| Software | Free demonstration software and SDK |
| Cables | RF cables and connectors not included, supplied at extra cost |
Frequently asked questions
What is the read range of the IDTS-ULA?
0–2 m, in all directions around the antenna rather than in one long beam. The RF output is adjustable from 0 to 3 dBm, so you can shrink the zone to suit a counter, desk or shelf.
Which frequencies and tag protocols does it support?
It covers 860–960 MHz, which includes India's 865–868 MHz UHF RFID band. It supports ISO 18000-6C (EPC Class 1 Gen2) and ISO 18000-6B tags and uses FHSS frequency hopping.
Can the IDTS-ULA be used outdoors?
No. It carries an IP40 rating, so it is meant for indoor installation. It operates from −20 °C to +60 °C at up to 80% non-condensing humidity.
Are RF cables and connectors included?
No, RF cables and connectors are supplied at extra cost. Confirm the cable length and reader connector you need when ordering. Free demonstration software and an SDK are provided for integration.
