Printable UHF On-Metal RFID Label ID-UM9522 (95 × 22 mm, Monza R6)

A long on-metal RFID label for racks and trolleys

At 95 × 22 mm, the ID-UM9522 is shaped for the long, shallow faces common in warehouses and plants: the front of a rack beam, a trolley rail, a machine guard or an equipment panel. The length gives room for a location or asset code and a barcode on one line, and at 22 mm high it still fits most beam and profile faces.

Rack and location labelling

On steel racking, a location label is only useful if it reads where it is stuck. This on-metal construction lets each bay or shelf carry its own RFID ID, so a handheld reader can record the location along with the tagged stock or equipment during a count. The printed barcode stays as a fallback for scanners and for people.

Specs that matter when ordering

The Impinj Monza R6 / R6-P chip responds across 860–960 MHz, covering India's 865–868 MHz band, and the label is rated up to 7 m depending on reader and placement. At 1.25 mm it is thicker than the 1 mm ID-UM6025 and ID-UM8040, so confirm your printer handles that media, or order the labels pre-encoded. The warehouse RFID implementation guide covers rollout; other sizes are under on-metal RFID tags.