Flexible UHF On-Metal RFID Label ID-60X25 (60 × 25 mm)

What the 60 × 25 mm on-metal RFID label is for

Ordinary paper UHF labels stop reading once they are stuck on steel. The ID-60X25 is an on-metal UHF label: apply it straight onto a machine, mould or metal bin and it still reads, at up to 6 m in good conditions. At 60 × 25 mm it is a middle size in our flexible on-metal range, large enough to print an asset number and a barcode legibly and small enough for a machine bezel, a die block or a tool trolley.

Where it fits on the shop floor

• Moulds, dies and fixtures in plastics, forging and press shops
• Machines and panels on a preventive-maintenance round
• Machined parts and sub-assemblies moving between stations
• Gauges and instruments due for calibration

Our manufacturing WIP tracking guide explains how these reads feed a production system.

Fitting and reading tips

Choose a flat patch away from weld beads, paint blisters and swarf, and clean it with isopropyl alcohol before applying. On machines, place the label above the coolant splash line and out of easy reach of hands. When reading a rack of tagged parts, lower the reader power and scan item by item so neighbouring parts do not answer as well.

Need a different size?

For narrow edges or a bigger asset plate, compare the other formats in our on-metal RFID tags range.