UHF RFID Circular Polarized Antenna 8 dBi ID-ANT-8CP (300 × 300 mm)
A standard 300 × 300 mm, 8 dBi circular polarized UHF RFID panel antenna for dock doors, conveyor checkpoints and factory gates, connected to multi-port fixed readers.
₹14,500
per piece + 18% GST
₹17,110 incl. GST
Minimum order: 1 piece · buy online and pay by NEFT or UPI, or request a quote
View datasheet PDF · 186 KB- 7-day replacement · 1-year warranty against manufacturing defects
- Blue Dart next-day delivery
- Buy online, pay by NEFT or UPI · in-stock items are dispatched the same day after payment · shipping ₹300 per kg + GST
Key features
- 8 dBi gain with right-hand circular polarization
- Quoted read range of 6–10 m in warehouse conditions
- 300 × 300 × 40 mm, 0.9 kg, IP65 housing
- Up to 3 W input; N-female, 50 Ω, VSWR ≤ 1.5
- −25 °C to +70 °C for cold stores and open docks
- Works with 4-port and 8-port fixed UHF readers
- Frequency
- 902–928 MHz
- Read range
- 6–10 m in warehouse conditions (depends on reader, cable and tag)
- Operating temperature
- −25 °C to +70 °C
Overview
The 8 dBi ID-ANT-8CP antenna for dock doors and conveyors
8 dBi is the gain class most industrial UHF RFID portals are built around: focused enough to reach across a dock opening, without the narrow beam of a 10–12 dBi antenna. The ID-ANT-8CP puts that into a 300 × 300 × 40 mm IP65 panel with a quoted read range of 6–10 m in warehouse conditions.
How a dock-door portal is laid out
- Mount the antennas. Usually one panel on each side of the dock door, angled toward the opening, or one above a conveyor facing down.
- Connect to the reader. Each antenna runs on its own coax cable to a port on a fixed reader; a 4-port reader can drive up to four antennas on one door.
- Tune and test. Adjust reader power and antenna angles so loads in the doorway read reliably and tags on the next dock or nearby racking do not.
Built for warehouse conditions
The IP65 housing and −25 °C to +70 °C operating range cover open docks, hot sheds and cold stores. The panel weighs 0.9 kg, accepts up to 3 W input and connects through an N-female socket to low-loss coax such as LMR-400 or RG-8. Keep cable runs as short as the layout allows, since every metre of coax loses some signal before it reaches the antenna.
Frequency and pairing
The ID-ANT-8CP is listed for 902–928 MHz. For a site in India, which uses the 865–868 MHz band, confirm the band variant when you request a quote, or consider the India-band IDTS-RA9350 9 dBi PCB antenna or the IDTS-RUCA9 9 dBi circular antenna, which has WPC ETA. Drive the antennas from one of our UHF RFID 4-port readers.
Typical applications
- Warehouse dock doors
- Conveyor checkpoints
- Factory gates
- Cold store warehouses
- Inbound receiving portals
Specifications
Datasheet (PDF)| Gain | 8 dBi |
|---|---|
| Frequency | 902–928 MHz |
| Polarization | Circular (RHCP) |
| Read range | 6–10 m in warehouse conditions (depends on reader, cable and tag) |
| Connector | N-female |
| Impedance | 50 Ω |
| VSWR | ≤ 1.5 |
| Max input power | 3 W |
| Dimensions | 300 × 300 × 40 mm |
| Weight | 0.9 kg |
| IP rating | IP65 |
| Operating temperature | −25 °C to +70 °C |
| Compatible with | Fixed UHF readers with external antenna ports (4-port and 8-port) |
_Z1BHfBd.webp)
