Skip to content
India RFID Store

Shop by category

RFID Readers57
RFID Tags168
Labels & Stickers204
Cards12
Wristbands25
Active RFID & BLE
Printers & Locks
Solutions
All categoriesBuying guidesProduct videosRFID FAQROI calculatorCertificationsAbout usContact
UHF On-Metal RFID Label ID-6006-U8 (60 × 6 mm, Ultra-Slim)
Model ID-6006-U8IdentiumIn Stock

UHF On-Metal RFID Label ID-6006-U8 (60 × 6 mm, Ultra-Slim)

A 60 × 6 mm ultra-slim UHF on-metal label for equipment with almost no free surface: server front panels, network switches, PCB borders and narrow instrument handles.

₹65

per piece + 18% GST

Minimum order: 500 pieces · the final price for your quantity is confirmed in the quote

Share via WhatsAppRequest a sample
View datasheet PDF · 162 KB
  • 7-day replacement · 1-year warranty against manufacturing defects
  • Blue Dart next-day delivery
  • Samples ₹250 (1–2 pcs, incl. shipping) · request

Key features

  • Only 6 mm wide; fits below drive bays and along panel edges
  • Reads 1–2 m mounted on metal
  • Ultra-thin anti-metal foam with PET face
  • Metal-grade high-tack acrylic adhesive
  • Operates from −20 °C to +70 °C
  • Printable with a short asset ID or serial number
Chip
U8
Frequency
865–868 MHz (India)
Protocol
EPC Gen2 / ISO 18000-6C
Read range
1–2 m on metal

Overview

Ultra-slim on-metal RFID label for dense IT racks

The ID-6006-U8 is the label to choose when nothing wider will fit. At 6 mm wide it can sit below the drive bay of a 1U server, along the side panel of a switch in a fully populated rack, or on the border of a PCB, without covering vents, indicator LEDs or ports. The 60 mm length carries the antenna and gives 1–2 m read range on metal.

What a 1–2 m range means in practice

This range suits close, deliberate reads: an engineer walking a data-centre aisle with a UHF handheld reader, a check at a repair bench, or a read point on a PCB line. It is not meant for reading across a room. Where there is space for a wider label, the on-metal RFID tag range has larger formats with longer range.

Where it is used

  • 1U and 2U server front panels and blade server chassis
  • Network switches and patch panels in full racks
  • PCB and electronics assembly, for board-level tracking through production and repair
  • Calibrated tools and gauges with narrow metal handles

The PET face can be printed with a short asset ID or serial number by fine-detail thermal transfer.

Typical applications

  • 1U and 2U servers
  • Network switches
  • Patch panels
  • Blade server chassis
  • PCB production tracking
  • Calibrated tools and gauges

Specifications

Datasheet (PDF)
Dimensions60 × 6 mm (ultra-slim strip)
ChipU8
Frequency865–868 MHz (India)
ProtocolEPC Gen2 / ISO 18000-6C
Read range1–2 m on metal
MaterialUltra-thin anti-metal foam with PET face
MountingMetal-grade high-tack acrylic adhesive
Operating temperature−20 °C to +70 °C

Frequently asked questions

How slim is the ID-6006-U8 and where does it fit?
It measures 60 × 6 mm. At 6 mm wide it fits on a laptop edge, below a server bezel or along a PCB border without covering vents, LEDs or ports.
What read range does it give on metal?
1–2 m on metal surfaces. That suits handheld audits in racks and bench checks; for longer range on open surfaces, choose a wider on-metal label.
Which reader should I use with it?
A UHF handheld held close to the rack or bench works best given the 1–2 m range. The label follows EPC Gen2 / ISO 18000-6C at 865–868 MHz, the band used for UHF RFID in India, so any Gen2 handheld or desktop reader on that band will read it.
Can anything be printed on a 6 mm label?
Yes, a short line such as an asset ID, department code or serial number, using fine-detail thermal transfer printing. Share your print layout when you ask for a quote so it can be checked against the label size.

Buying guides

Related products

All On Metal RFID Tags →

Your quote list

Saved on this device. No payment is taken online.

Your list is empty. Use “Add to quote” on any product, then send one request for everything.