UHF On-Metal RFID Label ID-3015-U8 (30 × 15 mm, IP67)

30 × 15 mm on-metal RFID label for small metal assets

The ID-3015-U8 is for metal items too small for a standard asset label: torque wrenches, calibrated gauges, narrow pipe runs, breaker panel doors and the bezel strip of a network switch. Its anti-metal foam layer keeps the UHF antenna working when the label sits directly on steel or aluminium, giving 1–3 m read range on metal.

Made for curved and damp locations

The label is flexible, so it follows a pipe, conduit or cylindrical tank instead of lifting at the edges, and a high-tack industrial acrylic adhesive holds it in place. The IP67 rating (dust-tight and protected against temporary immersion in water) suits damp plant rooms and pipework that gets wet, within the −20 °C to +70 °C operating range.

Print and encode in one pass

The white top face accepts thermal transfer printing, so a barcode, QR code or asset number sits on the same label as the RFID number. Print and encode together on a UHF RFID printer, then audit tool cribs or pipe racks with a UHF handheld reader. Larger formats are listed in the on-metal RFID tag range.