IDentium

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-1504 is a fingertip-sized UHF on-metal (anti-metal) RFID tag built on a PCB substrate. At just 15 x 4 mm with a 3.5 mm profile, it is a slim rectangular bar designed to be screwed directly onto metal parts that are far too small for a conventional hard tag. Two through-holes, one at each en..

The IDTS-1804 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB body and shaped as a small rectangular bar measuring just 18 x 4 x 3.5 mm. It is designed to be fixed directly onto metal, and its slim bar profile fits the narrow edges, brackets and housings where a conventional label or ..

The IDTS-1907 is a compact on-metal (anti-metal) UHF RFID tag from IDentium, built on a PCB substrate in a slim 19 x 7 x 4 mm bar format with rounded ends. It is made for the assets that defeat ordinary labels and inlays: small metal tools, fixtures, fittings and equipment parts where there is barel..

The IDTS-2504 is a slim passive UHF RFID strip tag built on a green PCB substrate, measuring just 25 x 4 x 1.8 mm. Its narrow bar form factor is designed for items that simply have no room for a conventional label or hard tag - circuit boards, thin edges, slender handles and cable runs. The chip sit..

The IDTS-2510 is a compact UHF on-metal (anti-metal) RFID tag built on a 25 x 10 mm rectangular PCB bar, designed to be fixed directly onto metal assets where a paper label or a standard inlay simply will not read. At 3.4 mm thick with two 2.3 mm mounting holes at a 21 mm pitch, it gives Indian asse..

The IDTS-2626 is a passive UHF on-metal (anti-metal) RFID tag built as a 26 x 26 mm black square block, 5.5 mm thick, combining a metal alloy body, a PCB antenna and epoxy resin encapsulation. Two countersunk mounting holes let it be screw-fixed permanently onto machinery, cylinders, racks and tooli..

The IDTS-3511 is a slim passive UHF on-metal (anti-metal) RFID tag built on a black PCB substrate. It is a compact rectangular bar measuring 35 x 11 mm, with two through-holes for screw mounting, so it can be fixed permanently to metal assets that are handled or moved. Designed for asset registers t..

The IDTS-4216 is a passive UHF on-metal (anti-metal) RFID tag built on a rectangular PCB bar measuring 42 x 16 x 2.6 mm. The black PCB body carries six copper-ringed mounting holes, three at each end, plus a circular opening in the centre, so it can be mechanically fixed to metal assets rather than ..

The IDTS-5010 is a UHF on-metal (anti-metal) RFID tag built as a black-coated PCB bar measuring 50 mm x 10 mm, with a mounting hole at each end and a central raised chip encapsulation dot. The narrow bar form is aimed at the metal assets that defeat ordinary paper and label tags - rack rails, panel ..

The IDTS-5020 is a passive UHF on-metal (anti-metal) RFID tag built on a rigid PCB body, measuring 50 x 20 x 4 mm in a rectangular bar form. It is designed to be read while fixed directly to metal, delivering a read distance of approx. 3.5 m on metal, and it carries two mounting holes of 3.2 mm diam..

The IDTS-5213 is a slim rectangular UHF on-metal (anti-metal) RFID tag on a PCB substrate, measuring 52 x 13 x 3 mm with rounded corners and a black finish. It is built to be screwed straight onto metal — racks, panels, tool bodies, frames and machine housings — where an ordinary label tag would sim..