Search

The ID-DCL-G100 is a heavy-duty digital cipher cabinet lock that combines a 9-digit password keypad, RFID card unlocking, and a mechanical key override — perfect for office cabinets, gym lockers, school furniture, hotel storage, and high-traffic shared environments. Built around a zinc-alloy and alu..

The ID-DKL-1986 is a compact, easy-to-fit digital keypad combination cam lock — purpose-built for secure, keyless access on cabinets, drawers, mailboxes, gym lockers, RV compartments, and office furniture. A simple 12-button keypad with C (clear) and OK keys lets you set and reset your own password ..

The ID-RL7014 is a 70 × 14 mm passive UHF RFID inlay built for the jobs that defeat ordinary inlays: densely stacked items that detune against one another, goods sitting on or near liquid, and thin garments read in bulk. A single SKU covers softlines, footwear and accessories, and the same den..

The ID-SL15 is IDentium's in-house UHF RFID sled reader — an all-day, clip-on handheld that turns any smartphone or tablet into a 15-metre RFID scanner. Built on the ID_N710 UHF reader IC and paired with a 3 dBi circularly-polarised antenna on a 180° rotating hinge, it delivers B-class read performa..

The IDTS-0804 is a miniature UHF anti-metal RFID tag from IDentium, built on a PCB body measuring just 8 x 4 x 2.8 mm. It is a chip-scale black rectangular block designed to be fitted directly onto metal assets that are far too small for a conventional on-metal tag - hand tools, printed circuit boar..

The IDTS-1204 is a fingertip-sized passive UHF on-metal RFID tag built on a PCB body measuring just 12 x 4 x 2.8 mm. It is designed for the items most RFID tags are simply too big for — circuit boards, hand tools, instruments, jigs and small metal parts — while still delivering an anti-m..

The IDTS-2504 is a slim passive UHF RFID strip tag built on a green PCB substrate, measuring just 25 x 4 x 1.8 mm. Its narrow bar form factor is designed for items that simply have no room for a conventional label or hard tag - circuit boards, thin edges, slender handles and cable runs. The chip sit..

The IDTS-2510 is a compact UHF on-metal (anti-metal) RFID tag built on a 25 x 10 mm rectangular PCB bar, designed to be fixed directly onto metal assets where a paper label or a standard inlay simply will not read. At 3.4 mm thick with two 2.3 mm mounting holes at a 21 mm pitch, it gives Indian asse..

The IDTS-2626 is a passive UHF on-metal (anti-metal) RFID tag built as a 26 x 26 mm black square block, 5.5 mm thick, combining a metal alloy body, a PCB antenna and epoxy resin encapsulation. Two countersunk mounting holes let it be screw-fixed permanently onto machinery, cylinders, racks and tooli..

The IDTS-4216 is a passive UHF on-metal (anti-metal) RFID tag built on a rectangular PCB bar measuring 42 x 16 x 2.6 mm. The black PCB body carries six copper-ringed mounting holes, three at each end, plus a circular opening in the centre, so it can be mechanically fixed to metal assets rather than ..

The IDTS-6015 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB substrate, shaped as a slim white rectangular bar measuring 60 x 15 x 4 mm. It carries mounting holes at both ends plus a hole at the centre, so it is fixed with screws rather than stuck down — a practical choice for Indian..

The IDTS-6030 is a passive UHF on-metal (anti-metal) RFID tag built on a rigid white PCB plate measuring 60 x 30 x 4 mm with rounded corners. It is designed to be fixed directly onto metal assets, where an ordinary label tag would be detuned, and it reads at approx. 6 m on metal. Two 4 mm mounting h..