Bluetooth UHF RFID Portable Reader MUBR01 is a easy to use RFID hand-held with Android (4.3 above) smart phone. MUBR01 no display, one button, 3 Led light. Easy to contact with smart phone or tablet, one hand control, high performance good for retail, document management, anti-counterfeiting etc.

Tag / Transponder Protocols

EPC Class 1 Gen 2(ISO 18000-6C), Bluetooth 4.0(BLE)

RF Interface

Antenna Connector: built-in 2dBi ceramic antennas

RF Output: 5dBM to 30dBM(1W), +/-1.0dBM, All antennas RF are adjustable

Frequency: FCC(NA, SA)902-928MHz, ETSI (EU) 865-867MHz, SRRC-MII (P.R.China) 840-845 MHz, 920-925MHz

Power

DC Supply: Micro-USB 5pin charging

Charging time: about 5.5 hours

Battery: 3.7V / 3000mAh rechargeable lithium polymer battery (non-replaceable)

Hardware Structure

RFID ASIC: QM100

Status Alert: Power state lights, Charging status lights,Active lights

Module: MUBR01

Intelligent terminal: Android 4.3 above

Performance

Reading Rate: ≥50tags/s

Reading Distance: 0-3m

RF continuous working time: about 6 hours (active mode)

Standby time: about 30 hours

Environmental Characteristics

Operating Temperature: -5℃ to +50℃

Storage Temperature: -10℃ to +45℃

Specification

        Dimension: 130mm×65mm×16mm

Frequently asked questions

Does this Bluetooth UHF RFID reader work with an Android phone?

Yes. The MUBR01 portable UHF RFID reader pairs with an Android smartphone or tablet over Bluetooth 4.0 BLE and works with Android 4.3 and above. It has no display of its own, only one button and three LED indicators, so the phone acts as the screen for one-hand operation.

Is this UHF reader suitable for India's WPC approved frequency?

Yes. The MUBR01 supports the ETSI 865 to 867 MHz range, which is India's UHF RFID band approved by WPC and licence-free within notified power limits, and it also covers FCC and China frequency plans. RF output is adjustable from 5 dBm to 30 dBm, or 1 watt, through a built-in 2 dBi ceramic antenna.

What battery does the MUBR01 portable reader use?

The MUBR01 uses a 3.7V 3000 mAh rechargeable lithium polymer battery charged through a micro-USB port in about 5.5 hours. The battery is not user-replaceable, and status lights show power, charging and active states. India RFID Store supplies and supports the reader across India.

What can a portable Bluetooth UHF reader be used for?

The MUBR01 Bluetooth UHF reader reads EPC Class 1 Gen 2 tags to ISO 18000-6C and is used in India for retail stock counting, document and file management, and anti-counterfeiting checks. Pricing depends on quantity and accessories, so check the listed price on this page or request bulk and OEM pricing.

Related guides & resources

• Browse all RFID Handheld Readers
• Read: handheld reader buyer guide
• Read: how to choose the right RFID reader
• BIS certified RFID readers: BIS certified RFID readers