Search

The ID-CTT-960 is a reusable UHF RFID Cable Tie Tag operating across the global UHF band (860-960 MHz). With its ABS housing, aluminum etching antenna, and waterproof construction, it's purpose-built for harsh outdoor and industrial tracking environments such as gas cylinders, containers, IT equipme..

The IDTS-0603 is one of the smallest on-metal UHF RFID tags in the IDentium range: a chip-sized rectangular PCB block measuring just 6 x 3 x 2.8 mm. It is built as an anti-metal tag, so it is intended to be fitted directly onto metal assets that are far too small to carry a conventional label or a s..

The IDTS-0803 is an ultra-miniature UHF on-metal (anti-metal) RFID tag from IDentium, built on a rigid black PCB body measuring just 8 x 3 x 4.3 mm. It is sized for the assets that normally defeat RFID altogether — small metal parts, instruments and sub-assemblies where there is simply no room..

The IDTS-0804 is a miniature UHF anti-metal RFID tag from IDentium, built on a PCB body measuring just 8 x 4 x 2.8 mm. It is a chip-scale black rectangular block designed to be fitted directly onto metal assets that are far too small for a conventional on-metal tag - hand tools, printed circuit boar..

The IDTS-1004 is a miniature on-metal UHF RFID tag from IDentium, built as a small rectangular PCB strip measuring just 10 x 4 x 2.8 mm. It exists for the assets most tagging projects quietly give up on: the hand tool, the circuit board, the instrument, the gauge, the fitting that is far too small f..

The IDTS-1204 is a fingertip-sized passive UHF on-metal RFID tag built on a PCB body measuring just 12 x 4 x 2.8 mm. It is designed for the items most RFID tags are simply too big for — circuit boards, hand tools, instruments, jigs and small metal parts — while still delivering an anti-m..

The IDTS-13042 is a passive UHF on-metal RFID tag built as a 130 x 42 x 10.5 mm black bar with rounded corners, moulded in reinforced PC. It is designed specifically to be read while mounted directly on metal, where a standard label tag would be detuned, and it reads at approx. 12 m on metal. The ba..

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-1504 is a fingertip-sized UHF on-metal (anti-metal) RFID tag built on a PCB substrate. At just 15 x 4 mm with a 3.5 mm profile, it is a slim rectangular bar designed to be screwed directly onto metal parts that are far too small for a conventional hard tag. Two through-holes, one at each en..

The IDTS-1804 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB body and shaped as a small rectangular bar measuring just 18 x 4 x 3.5 mm. It is designed to be fixed directly onto metal, and its slim bar profile fits the narrow edges, brackets and housings where a conventional label or ..

The IDTS-1907 is a compact on-metal (anti-metal) UHF RFID tag from IDentium, built on a PCB substrate in a slim 19 x 7 x 4 mm bar format with rounded ends. It is made for the assets that defeat ordinary labels and inlays: small metal tools, fixtures, fittings and equipment parts where there is barel..

The IDTS-2504 is a slim passive UHF RFID strip tag built on a green PCB substrate, measuring just 25 x 4 x 1.8 mm. Its narrow bar form factor is designed for items that simply have no room for a conventional label or hard tag - circuit boards, thin edges, slender handles and cable runs. The chip sit..