Search

The IDTS-0803 is an ultra-miniature UHF on-metal (anti-metal) RFID tag from IDentium, built on a rigid black PCB body measuring just 8 x 3 x 4.3 mm. It is sized for the assets that normally defeat RFID altogether — small metal parts, instruments and sub-assemblies where there is simply no room..

The IDTS-0804 is a miniature UHF anti-metal RFID tag from IDentium, built on a PCB body measuring just 8 x 4 x 2.8 mm. It is a chip-scale black rectangular block designed to be fitted directly onto metal assets that are far too small for a conventional on-metal tag - hand tools, printed circuit boar..

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-1804 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB body and shaped as a small rectangular bar measuring just 18 x 4 x 3.5 mm. It is designed to be fixed directly onto metal, and its slim bar profile fits the narrow edges, brackets and housings where a conventional label or ..

The IDTS-1907 is a compact on-metal (anti-metal) UHF RFID tag from IDentium, built on a PCB substrate in a slim 19 x 7 x 4 mm bar format with rounded ends. It is made for the assets that defeat ordinary labels and inlays: small metal tools, fixtures, fittings and equipment parts where there is barel..

The IDTS-2504 is a slim passive UHF RFID strip tag built on a green PCB substrate, measuring just 25 x 4 x 1.8 mm. Its narrow bar form factor is designed for items that simply have no room for a conventional label or hard tag - circuit boards, thin edges, slender handles and cable runs. The chip sit..

The IDTS-2510 is a compact UHF on-metal (anti-metal) RFID tag built on a 25 x 10 mm rectangular PCB bar, designed to be fixed directly onto metal assets where a paper label or a standard inlay simply will not read. At 3.4 mm thick with two 2.3 mm mounting holes at a 21 mm pitch, it gives Indian asse..

The IDTS-2626 is a passive UHF on-metal (anti-metal) RFID tag built as a 26 x 26 mm black square block, 5.5 mm thick, combining a metal alloy body, a PCB antenna and epoxy resin encapsulation. Two countersunk mounting holes let it be screw-fixed permanently onto machinery, cylinders, racks and tooli..

The IDTS-3511 is a slim passive UHF on-metal (anti-metal) RFID tag built on a black PCB substrate. It is a compact rectangular bar measuring 35 x 11 mm, with two through-holes for screw mounting, so it can be fixed permanently to metal assets that are handled or moved. Designed for asset registers t..

The IDTS-6015 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB substrate, shaped as a slim white rectangular bar measuring 60 x 15 x 4 mm. It carries mounting holes at both ends plus a hole at the centre, so it is fixed with screws rather than stuck down — a practical choice for Indian..

The IDTS-6030 is a passive UHF on-metal (anti-metal) RFID tag built on a rigid white PCB plate measuring 60 x 30 x 4 mm with rounded corners. It is designed to be fixed directly onto metal assets, where an ordinary label tag would be detuned, and it reads at approx. 6 m on metal. Two 4 mm mounting h..

The IDTS-6220 is a passive UHF on-metal (anti-metal) RFID tag built as a rounded-end rectangular bar measuring 62 x 20 x 6 mm, with two mounting holes for permanent mechanical fixing. It pairs a PCB inlay potted in epoxy resin with a metal alloy body, so it can be bolted straight onto machinery, cyl..