Search

The IDTS-0603 is one of the smallest on-metal UHF RFID tags in the IDentium range: a chip-sized rectangular PCB block measuring just 6 x 3 x 2.8 mm. It is built as an anti-metal tag, so it is intended to be fitted directly onto metal assets that are far too small to carry a conventional label or a s..

The IDTS-0803 is an ultra-miniature UHF on-metal (anti-metal) RFID tag from IDentium, built on a rigid black PCB body measuring just 8 x 3 x 4.3 mm. It is sized for the assets that normally defeat RFID altogether — small metal parts, instruments and sub-assemblies where there is simply no room..

The IDTS-0804 is a miniature UHF anti-metal RFID tag from IDentium, built on a PCB body measuring just 8 x 4 x 2.8 mm. It is a chip-scale black rectangular block designed to be fitted directly onto metal assets that are far too small for a conventional on-metal tag - hand tools, printed circuit boar..

The IDTS-1004 is a miniature on-metal UHF RFID tag from IDentium, built as a small rectangular PCB strip measuring just 10 x 4 x 2.8 mm. It exists for the assets most tagging projects quietly give up on: the hand tool, the circuit board, the instrument, the gauge, the fitting that is far too small f..

The IDTS-1204 is a fingertip-sized passive UHF on-metal RFID tag built on a PCB body measuring just 12 x 4 x 2.8 mm. It is designed for the items most RFID tags are simply too big for — circuit boards, hand tools, instruments, jigs and small metal parts — while still delivering an anti-m..

The IDTS-13042 is a passive UHF on-metal RFID tag built as a 130 x 42 x 10.5 mm black bar with rounded corners, moulded in reinforced PC. It is designed specifically to be read while mounted directly on metal, where a standard label tag would be detuned, and it reads at approx. 12 m on metal. The ba..

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-1804 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB body and shaped as a small rectangular bar measuring just 18 x 4 x 3.5 mm. It is designed to be fixed directly onto metal, and its slim bar profile fits the narrow edges, brackets and housings where a conventional label or ..

The IDTS-1907 is a compact on-metal (anti-metal) UHF RFID tag from IDentium, built on a PCB substrate in a slim 19 x 7 x 4 mm bar format with rounded ends. It is made for the assets that defeat ordinary labels and inlays: small metal tools, fixtures, fittings and equipment parts where there is barel..

The IDTS-2510 is a compact UHF on-metal (anti-metal) RFID tag built on a 25 x 10 mm rectangular PCB bar, designed to be fixed directly onto metal assets where a paper label or a standard inlay simply will not read. At 3.4 mm thick with two 2.3 mm mounting holes at a 21 mm pitch, it gives Indian asse..

The IDTS-2626 is a passive UHF on-metal (anti-metal) RFID tag built as a 26 x 26 mm black square block, 5.5 mm thick, combining a metal alloy body, a PCB antenna and epoxy resin encapsulation. Two countersunk mounting holes let it be screw-fixed permanently onto machinery, cylinders, racks and tooli..

The IDTS-3511 is a slim passive UHF on-metal (anti-metal) RFID tag built on a black PCB substrate. It is a compact rectangular bar measuring 35 x 11 mm, with two through-holes for screw mounting, so it can be fixed permanently to metal assets that are handled or moved. Designed for asset registers t..