Search

The IDTS-1004 is a miniature on-metal UHF RFID tag from IDentium, built as a small rectangular PCB strip measuring just 10 x 4 x 2.8 mm. It exists for the assets most tagging projects quietly give up on: the hand tool, the circuit board, the instrument, the gauge, the fitting that is far too small f..

The IDTS-1204 is a fingertip-sized passive UHF on-metal RFID tag built on a PCB body measuring just 12 x 4 x 2.8 mm. It is designed for the items most RFID tags are simply too big for — circuit boards, hand tools, instruments, jigs and small metal parts — while still delivering an anti-m..

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-1504 is a fingertip-sized UHF on-metal (anti-metal) RFID tag built on a PCB substrate. At just 15 x 4 mm with a 3.5 mm profile, it is a slim rectangular bar designed to be screwed directly onto metal parts that are far too small for a conventional hard tag. Two through-holes, one at each en..

The IDTS-1804 is a passive UHF on-metal (anti-metal) RFID tag built on a PCB body and shaped as a small rectangular bar measuring just 18 x 4 x 3.5 mm. It is designed to be fixed directly onto metal, and its slim bar profile fits the narrow edges, brackets and housings where a conventional label or ..

The IDTS-2510 is a compact UHF on-metal (anti-metal) RFID tag built on a 25 x 10 mm rectangular PCB bar, designed to be fixed directly onto metal assets where a paper label or a standard inlay simply will not read. At 3.4 mm thick with two 2.3 mm mounting holes at a 21 mm pitch, it gives Indian asse..

The IDTS-4216 is a passive UHF on-metal (anti-metal) RFID tag built on a rectangular PCB bar measuring 42 x 16 x 2.6 mm. The black PCB body carries six copper-ringed mounting holes, three at each end, plus a circular opening in the centre, so it can be mechanically fixed to metal assets rather than ..

The IDTS-5010 is a UHF on-metal (anti-metal) RFID tag built as a black-coated PCB bar measuring 50 mm x 10 mm, with a mounting hole at each end and a central raised chip encapsulation dot. The narrow bar form is aimed at the metal assets that defeat ordinary paper and label tags - rack rails, panel ..

The IDTS-5213 is a slim rectangular UHF on-metal (anti-metal) RFID tag on a PCB substrate, measuring 52 x 13 x 3 mm with rounded corners and a black finish. It is built to be screwed straight onto metal — racks, panels, tool bodies, frames and machine housings — where an ordinary label tag would sim..

The IDTS-5213-LED from IDentium is a UHF on-metal (anti-metal) RFID tag built on a slim PCB bar measuring 52 x 13 x 2.5 mm, with a screw hole at each end and a built-in LED indicator that lights up when the tag is read. That visible confirmation is what sets this tag apart from a plain on-metal mark..

The IDTS-5858 is a 58 x 58 mm on-metal UHF RFID tag from IDentium, built for the assets that ordinary paper and PET labels simply cannot handle — steel racking, gas cylinders, server cabinets, machine frames, cages and metal trolleys. The anti-metal construction is designed to be fixed directly onto..

The IDTS-6010-LED is a slim rectangular-bar UHF on-metal (anti-metal) RFID tag on a black PCB substrate, measuring just 60 x 10 mm. What sets it apart is the built-in green LED indicator that flashes every time the tag is read — so the person holding the reader gets an immediate visual confirmation ..