Search

The IDTS-0603 is one of the smallest on-metal UHF RFID tags in the IDentium range: a chip-sized rectangular PCB block measuring just 6 x 3 x 2.8 mm. It is built as an anti-metal tag, so it is intended to be fitted directly onto metal assets that are far too small to carry a conventional label or a s..

The IDTS-0803 is an ultra-miniature UHF on-metal (anti-metal) RFID tag from IDentium, built on a rigid black PCB body measuring just 8 x 3 x 4.3 mm. It is sized for the assets that normally defeat RFID altogether — small metal parts, instruments and sub-assemblies where there is simply no room..

The IDTS-1307 is a fingertip-sized passive UHF on-metal (anti-metal) RFID tag built on a black PCB body, shaped as a small rectangular bar with a mounting hole at each end and a central domed epoxy bump over the chip area. At 13 x 7 mm it goes where a large asset plate simply will not fit — th..

The IDTS-5010 is a UHF on-metal (anti-metal) RFID tag built as a black-coated PCB bar measuring 50 mm x 10 mm, with a mounting hole at each end and a central raised chip encapsulation dot. The narrow bar form is aimed at the metal assets that defeat ordinary paper and label tags - rack rails, panel ..

The IDTS-5020 is a passive UHF on-metal (anti-metal) RFID tag built on a rigid PCB body, measuring 50 x 20 x 4 mm in a rectangular bar form. It is designed to be read while fixed directly to metal, delivering a read distance of approx. 3.5 m on metal, and it carries two mounting holes of 3.2 mm diam..

The IDTS-5822 is a flexible silicone passive UHF RFID tag from IDentium, built as a slim dog-bone bar measuring 58 x 22 x 3.6 mm. The silicone body bends to sit against curved and irregular surfaces, and the tag offers two mounting routes in one part: four elongated slots for cable ties, and a pre-a..

The IDTS-6220 is a passive UHF on-metal (anti-metal) RFID tag built as a rounded-end rectangular bar measuring 62 x 20 x 6 mm, with two mounting holes for permanent mechanical fixing. It pairs a PCB inlay potted in epoxy resin with a metal alloy body, so it can be bolted straight onto machinery, cyl..

The IDTS-7024 is a rugged, stud-mounted passive UHF RFID tag from IDentium, built as a 70 x 24 mm rectangular bar with a 7 mm thick body and a central threaded stud on the underside. The housing combines metal alloy, a PCB inlay and epoxy resin potting, and the tag carries an M3 internal thread for ..

The IDTS-7030 is a passive UHF RFID tag built on a PCB body, measuring 70 x 30 x 1.7 mm as a rectangular plate with rounded corners. Four 3.2 mm corner holes on 64 mm x 24 mm centres let you fix it permanently to an asset instead of relying on adhesive, and the -20 C to +150 C operating range means ..

The IDTS-8020-LED from IDentium is an 80 x 20 x 2.5 mm on-metal (anti-metal) UHF RFID tag built on a PCB substrate, finished in light blue, with a green LED indicator sitting in the centre of the board. It is a rectangular bar with two mounting holes, one at each end, so it can be fixed mechanically..

The IDTS-D25 is a 25 mm round black PCB disc tag built for one job that ordinary label tags cannot do: carrying a readable UHF identity while mounted directly on metal. Its anti-metal construction returns a read range of approx. 4 m on metal, and two pre-drilled 3.2 mm holes let it be fixed mechanic..

The IDTS-D28 is a compact 28 mm round black PCB on-metal UHF RFID tag from IDentium, built for asset identification directly on metal surfaces. Its anti-metal PCB construction delivers a read distance of approx. 3.5 m on metal, while two 3.2 mm mounting holes at 22.4 mm spacing allow the tag to be m..